摘要
排出室內渾濁的空氣吸進新鮮的空氣也不會發溫度的急劇變化，可以保持優質的室內空氣，下雨時可防止雨水飄入室內。
產品介紹
產品特性
■ 清晰明亮的外觀，優異的結構設計，別致細膩。
■ 配置5+6A+5和5+9A+5雙面鋼化中空玻璃，隔音、安全性能更佳。中空位置可搭配格條裝飾，令整體效果脫離單調單一，樣式多變。
■ 歐洲標準槽口設計，內扇料采用整合式設計，將壓條和窗扇融為一體，內設傳導條和執手傳動構件，外設離合式執手, 據需要可設置多點鎖，合頁式傳動軸，開啟角度O°～ 90°，抗風性能好。
■ 外框和內扇之間采用等壓、減壓原理，內設硅膠或三元乙丙(DPEM)密封膠條，其隔音、隔熱、防水、氣密性能更佳。
■ Clear, bright external appearance, excellent structural design, unique and refined.■ It is provided with 5+6A+5 and 5+9A+5 double side hollow toughened glass with better sound insulation and security.The hollow position can be collocated with grid ornament to make the whole effect free of monotony and with multiple designs.
產品特性
■ 傾斜10度-15度的開啟方式，是合理而科學的門窗。■ 排出室內渾濁的空氣吸進新鮮的空氣也不會發溫度的急劇變化，可以保持優質的室內空氣，下雨時可防止雨水飄入室內。
■ 可以與幕墻、固定窗組合在一起，形成多種設計形式。
■ 通過使用密閉性和復原良好的硅膠或三元乙丙(DPEM)密封膠條，提高了及隔熱、隔音性能，而且強化的耐久力可使之長期使用。
■ The tilt 10-15 degree opening form makes the doors and windows reason-able and scientific.
■ Exhausting of indoor cloudy air and suction of fresh air will not result in sharp change of temperature, so it can keep excellent indoor air and prevent rain from entering the room during rain.
■ It can be combined with curtain wall and fixed window to form multiple designs.
■ The use of ethylene propylene diene rubber sealing rubber bar with good air-tightness and recovery has improved the performance of heat and sound insulation and the high durability can extend service life.
產品特性
■ 外框采用三腔結構，獨特排水設計，保證任何情況下都能排水順暢。■ 應用隔熱鋁合金型材，使用滾壓方式把內外鋁合金和隔熱條組合在一起，具有隔熱、保溫、節能、隔音等優越性能。
■ 歐標槽口設計，玻璃采用5+18A+5中空鋼化玻璃，提高保溫性能和隔聲效果。
■ 采用優質EPEM膠條，具有耐候性強、抗老化，防水性能好、耐熱耐寒耐化學腐蝕等特點。
■ 采用德國、意大利門窗系統，造型優美，操作靈活。
■ The outline frame has used three cavity structures, unique drainage design, which can make sure that water to be smoothly drained off in any circumstances.■ Application of heat insulation aluminum alloy profile, using the rolling way to combine inside and outside aluminum alloy and heat insulation strip together, with heat insulation,warm preservation, energy saving, noise insulation and other advantages.
■ Europe standard slot design, we have purchased 5+18A+5 hollow tempered glass,improve warm preservation performance and sound insulation effect.
■ By using the high quality EPEM strip, has strong weather resistance, aging resistance, good waterproof performance, heat / cold resistance and chemical corrosion Characteristics.
■ We have purchased German, Italian door&window system, beautiful shape, flexible operation.
■ With European standard slot design, the internal leaf adopts integral design to make the trim strip be integrated with window leaf. It is provided with conducting strip and handle drive element inside and clutch type handle outside. Multiple point lock can be set where necessary. The hinge type drive shaft can open between 0-90 degrees. The point type air support positioning has strong wind resistance.■ Equal pressured and reduced pressure principle is used between outer frame and inner leaf. It is embedded with silica gel or ethylene propylene diene rubber sealing rubber bar for optimal performance in sound insulation, heat insulation, water proofing and air tightness.
產品特性
■ 外框采用三腔結構，獨特排水設計，保證任何情況下都能排水順暢。■ 應用隔熱鋁合金型材，使用滾壓方式把內外鋁合金和隔熱條組合在一起，具有隔熱、保溫、節能、隔音等優越性能。
■ 歐標槽口設計，可采用5+27A+5中空玻璃，提高保溫性能和隔聲效果。
■ 采用優質EPEM膠條，具有耐候性強、抗老化，防水性能好、耐熱耐寒耐化學腐蝕等特點。
■ 采用德國、意大利門窗系統，造型優美，操作靈活。
■ The outline frame has used three cavity structures, unique drainage design, which can make sure that water to be smoothly drained off in any circumstances.
■ Application of heat insulation aluminum alloy profile, using the rolling way to combine inside and outside aluminum alloy and heat insulation strip together, with heat insulation,warm preservation, energy saving, noise insulation and other advantages.
■ Europe standard slot design, can use 5+27A+5 hollow tempered glass, improve warm preservation performance and sound insulation effect.
■ By using the high quality EPEM strip, has strong weather resistance, aging resistance,good waterproof performance, heat / cold resistance and chemical corrosion characteristics.
■ We have purchased German, Italian high-grade hardware accessories, beautiful shape, flexible operation.
產品特性
■ 采用紗窗與窗組合一體，安裝簡單方便。
■ 外框采用三腔結構，獨特排水設計，保證任何情況下都能排水順暢。
■ 應用隔熱鋁合金型材，使用滾壓方式把內外鋁合金和隔熱條組合在一起，具有隔熱、保溫、節能、隔音等優越性能。
■ 歐標槽口設計，可采用5+18A+5中空玻璃，紗窗可以安裝金剛網、不銹鋼絲網。
■ The integration of screen window and window, simple and convenient for installation.
■ The frame adopts three cavity structures with unique drainage design, so as to guarantee smooth drainage under any circumstances.
■ By using insulating aluminum profiles and the rolling way to combine the inside and outside aluminum alloys and heat insulation strips together, with heat insulation, heat preservation, energy-saving, sound insulation and other high performance.
■ European standard slot design can use 5+18A+5 hollow glass, screen window can be mounted with diamond net or stainless steel wire mesh.
